BUILDING MATERIALS MADE FROM FLUE GAS DESULFURIZATION BY-PRODUCTS

Grutzeck, Michael W. ; DiCola, Maria ; Brenner, Paul

Pennsylvania State University

关键词: Building Materials;    Gypsum;    Portland Cement;    Sodium Hydroxides;    01 Coal, Lignite, And Peat;   

DOI  :  10.2172/881574
RP-ID  :  none
RP-ID  :  FG26-04NT42196
RP-ID  :  881574

美国|英语

来源: UNT Digital Library

【 摘 要 】

Flue gas desulphurization (FGD) materials are produced in abundant quantities by coal burning utilities. Due to environmental restrains, flue gases must be ''cleaned'' prior to release to the atmosphere. They are two general methods to ''scrub'' flue gas: wet and dry. The choice of scrubbing material is often defined by the type of coal being burned, i.e. its composition. Scrubbing is traditionally carried out using a slurry of calcium containing material (slaked lime or calcium carbonate) that is made to contact exiting flue gas as either a spay injected into the gas or in a bubble tower. The calcium combined with the SO{sub 2} in the gas to form insoluble precipitates. Some plants have been using dry injection of these same materials or their own Class C fly ash to scrub. In either case the end product contains primarily hannebachite (CaSO{sub 3} {center_dot} 1/2H{sub 2}O) with smaller amounts of gypsum (CaSO{sub 4} {center_dot} 2H{sub 2}O). These materials have little commercial use. Experiments were carried out that were meant to explore the feasibility of using blends of hannebachite and fly ash mixed with concentrated sodium hydroxide to make masonry products. The results suggest that some of these mixtures could be used in place of conventional Portland cement based products such as retaining wall bricks and pavers.