MAG-GATE System for Molten metal Flow Control

Nathenson, Richard D.

American Iron and Steel Institute

关键词: Steels;    36 Materials Science;    Carbon Steels;    Metal Industry;    Iron;   

DOI  :  10.2172/838871
RP-ID  :  NONE
RP-ID  :  FC36-97ID13554
RP-ID  :  838871

美国|英语

来源: UNT Digital Library

【 摘 要 】

The need for improved active flow control has been recognized as part of the Steel Industry Technology Roadmap. Under TRP 9808 for the American Iron and Steel Institute and the Department of Energy, Concept Engineering Group Inc. has developed MAG-GATE{trademark}, an electromagnetic system for active molten metal flow control. Two hot steel tests were successfully conducted in 2003 at the Whemco Foundry Division, Midland, PA. Approximately 110,000 pounds of 0.2% carbon steel were poured through the device subject to electromagnetic flow control. Excellent agreement between predicted and actual flow control was found. A survey of the molten metal flow control practices at 100 continuous casters in North America was also conducted in 2003. This report summarizes the results of the development program to date. Preliminary designs are described for the next step of a beta test at an operating billet/bloom or slab caster.