Rock Properties Model

Lum, C.

United States. Department of Energy. Yucca Mountain Project Office.

关键词: Radioactive Waste Facilities;    Site Characterization;    Mathematical Models;    Porosity;    Rock Mechanics;   

DOI  :  10.2172/838644
RP-ID  :  MDL-NBS-GS-000004, REV 01
RP-ID  :  AC28-01RW12101
RP-ID  :  838644

美国|英语

来源: UNT Digital Library

【 摘 要 】

The purpose of this model report is to document the Rock Properties Model version 3.1 with regard to input data, model methods, assumptions, uncertainties and limitations of model results, and qualification status of the model. The report also documents the differences between the current and previous versions and validation of the model. The rock properties model provides mean matrix and lithophysae porosity, and the cross-correlated mean bulk density as direct input to the ''Saturated Zone Flow and Transport Model Abstraction'', MDL-NBS-HS-000021, REV 02 (BSC 2004 [DIRS 170042]). The constraints, caveats, and limitations associated with this model are discussed in Section 6.6 and 8.2. Model validation accomplished by corroboration with data not cited as direct input is discussed in Section 7. The revision of this model report was performed as part of activities being conducted under the ''Technical Work Plan for: The Integrated Site Model, Revision 05'' (BSC 2004 [DIRS 169635]). The purpose of this revision is to bring the report up to current procedural requirements and address the Regulatory Integration Team evaluation comments. The work plan describes the scope, objectives, tasks, methodology, and procedures for this process.