NEW CATHODE MATERIALS FOR INTERMEDIATE TEMPERATURE SOLID OXIDE FUEL CELLS

Jacobson, Allan J.

University of Houston (United States)

关键词: Diffusion;    Cathodes;    Perovskite;    30 Direct Energy Conversion;    Oxides;   

DOI  :  10.2172/833850
RP-ID  :  NONE
RP-ID  :  FC26-03NT41960
RP-ID  :  833850

美国|英语

来源: UNT Digital Library

【 摘 要 】

Operation of SOFCs at intermediate temperatures (500-800 C) requires new combinations of electrolyte and electrode materials that will provide both rapid ion transport across the electrolyte and electrode-electrolyte interfaces and efficient electrocatalysis of the oxygen reduction and fuel oxidation reactions. This project concentrates on materials and issues associated with cathode performance that are known to become limiting factors as the operating temperature is reduced. The specific objectives of the proposed research are to develop cathode materials that meet the electrode performance targets of 1.0 W/cm{sup 2} at 0.7 V in combination with YSZ at 700 C and with GDC, LSGM or bismuth oxide based electrolytes at 600 C. The performance targets imply an area specific resistance of {approx}0.5 {Omega}cm{sup 2} for the total cell. The research strategy is to investigate both established classes of materials and new candidates as cathodes, to determine fundamental performance parameters such as bulk diffusion, surface reactivity and interfacial transfer, and to couple these parameters to performance in single cell tests. The initial choices for study are perovskite oxides based on Sr substituted LaFeO{sub 3}, where significant data in single cell tests exists at PNNL for cathodes on both YSZ and CSO/YSZ, and of Ln{sub 2}NiO{sub 4} compositions. A key component of the research strategy is to evaluate for each cathode material composition, the key performance parameters, including ionic and electronic conductivity, surface exchange rates, stability with respect to the specific electrolyte choice, and thermal expansion coefficients. Results on electrical conductivity relaxation measurements on La{sub 2}NiO{sub 4+x} and Pr{sub 2}NiO{sub 4+x} samples are reported and compared with results from previous studies. Studies of the crystallization of amorphous SrFeO{sub 3-x} and LaFeO{sub 3-x} films prepared by pulsed laser deposition are reported. Such studies are a preliminary to the combinatorial synthesis approach described in the first report.