Simulation of DIII-D Flat q Discharges

Kessel, C.E. ; Garofalo, A. ; Terpstra, T.

Princeton University. Plasma Physics Laboratory.

关键词: Bootstrap Current;    70 Plasma Physics And Fusion Technology;    Programming;    Doublet-3 Device;    Transport Equations;   

DOI  :  10.2172/828256
RP-ID  :  PPPL-3972
RP-ID  :  AC02-76CH03073
RP-ID  :  828256

美国|英语

来源: UNT Digital Library

【 摘 要 】

The Advanced Tokamak plasma configuration has significant potential for the economical production of fusion power. Research on various tokamak experiments are pursuing these plasmas to establish high {beta}, high bootstrap current fraction, 100% noninductive current, and good energy confinement, in a quasi-stationary state. One candidate is the flat q discharge produced in DIII-D, where the safety factor varies from 2.0 on axis, to slightly below 2.0 at the minimum, and then rises to about 3.5 at the 95% surface. This plasma is prototypical of those studied for power plants in the ARIES tokamak studies. The plasma is produced by ramping up the plasma current and ramping down the toroidal field throughout the discharge. The plasma current reaches 1.65 MA, and the toroidal field goes from 2.25 to 1.6 T. The q{sub min} remains high and at large radius, {rho} {approx} 0.6. The plasma establishes an internal transport barrier in the ion channel, and transitions to H-mode. The free-boundary Tokamak Simulation Code (TSC) is being used to model the discharge and project the impact of changes in the plasma current, toroidal field, and injected power programming.