Development of Simulants to Support Mixing Tests for High Level Waste and Low Activity Waste

EIBLING, RUSSELLE.

Savannah River Site (S.C.)

关键词: Low-Level Radioactive Wastes;    Sludges;    12 Management Of Radioactive Wastes, And Non-Radioactive Wastes From Nuclear Facilities;    Hydroxides;    Chemical Composition;   

DOI  :  10.2172/825248
RP-ID  :  WSRC-TR-2003-00220 SRT-RPP-2003-00098
RP-ID  :  AC09-96SR18500
RP-ID  :  825248

美国|英语

来源: UNT Digital Library

【 摘 要 】

The objectives of this study were to develop two different types of simulants to support vendor agitator design studies and mixing studies. The initial simulant development task was to develop rheologically-bounding physical simulants and the final portion was to develop a nominal chemical simulant which is designed to match, as closely as possible, the actual sludge from a tank. The physical simulants to be developed included a lower and upper rheologically bounded: pretreated low activity waste (LAW) physical simulant; LAW melter feed physical simulant; pretreated high level waste (HLW) physical simulant; HLW melter feed physical simulant. The nominal chemical simulant, hereafter referred to as the HLW Precipitated Hydroxide simulant, is designed to represent the chemical/physical composition of the actual washed and leached sludge sample. The objective was to produce a simulant which matches not only the chemical composition but also the physical properties of the actual waste sample. The HLW Precipitated Hydroxide simulant could then be used for mixing tests to validate mixing, homogeneity and representative sampling and transferring issues. The HLW Precipitated Hydroxide simulant may also be used for integrated nonradioactive testing of the WTP prior to radioactive operation.