DOWNHOLE VIBRATION MONITORING AND CONTROL SYSTEM

Cobern, Martin E.

APS Technology (United States)

关键词: Testing;    Monitoring;    Monitors;    Computerized Simulation;    Well Drilling;   

DOI  :  10.2172/822318
RP-ID  :  NONE
RP-ID  :  FC26-02NT41664
RP-ID  :  822318

美国|英语

来源: UNT Digital Library

【 摘 要 】

The purpose of this program is to develop the Drilling Vibration Monitoring & Control System (DVMCS) to both record and reduce drilling vibrations in a ''smart'' drill string. It is composed of two main elements. The first is a multi-axis active vibration damper to minimize harmful axial, lateral and torsional vibrations, and thereby increase both rate of penetration (ROP) and bit life, as well that the life of other drillstring components. The hydraulic impedance (hardness) of this damper will be continuously adjusted using unique technology that is robust, fast-acting and reliable. The second component is a real-time system to monitor 3-axis drillstring vibration, and related parameters including weight- and torque-on-bit (TOB) and temperature. This monitor will determine the current vibration environment and adjust the damper accordingly. In some configurations, it may also send diagnostic information to the surface via real-time telemetry. Phase I of this program addresses an evaluation of the environment in which the DVMCS will operate; modeling of a drillstring response including the active damper; a top-level design of the mechanical and electronic systems; analyzing the anticipated performance of the damper by modeling and laboratory testing of small prototypes; and doing preliminary economic, market, environmental and financing analyses. This phase is scheduled to last fourteen months, until November 30, 2003. During this first quarter, significant progress was achieved on the first two objectives, and work was begun on several others. Initial designs of the DVMCS are underway.