Evaluation of the DWPF Cold Chem Dissolution Method with Tank 7 and Tank 51 Radioactive Sludge

Click, D.R.

Savannah River Site (S.C.)

关键词: Sludges;    Heating;    Radioactive Waste Processing;    Dissolution;    Performance Testing;   

DOI  :  10.2172/822084
RP-ID  :  WSRC-TR-2003-00580
RP-ID  :  AC09-96SR18500
RP-ID  :  822084

美国|英语

来源: UNT Digital Library

【 摘 要 】

Dissolution experiments were conducted on radioactive sludge from Tank 7, before transfer of the contents of Tank 7 to Tank 51, and the subsequent sludge in Tank 51 to evaluate the effectiveness of the DWPF Cold Chem Method. The DWPF Cold Chem Method is a room temperature dissolution method (DWPF Cold Chem Method) used in the DWPF on the Slurry Receipt and Adjustment Tank (SRAT) samples in preparation for instrumental analysis. Four types of dissolutions experiments were carried out, the DWPF Cold Chem Method, hot aqua regia, sodium peroxide fusion and hot HF-HNO3. The hot HF-HNO3 digestion is modified version of the DWPF method that incorporates a heating step. The hot aqua regia and sodium peroxide fusion digestions were included as reference digestions. The resulting solutions from all the sludge digestions were analyzed by ICP-ES (Inductively Coupled Plasma Emission Spectroscopy). Visual observations and ICP-ES results were used to evaluate the effectiveness of the DWPF Cold Chem by comparison to the hot aqua regia, sodium peroxide fusion and the hot HF-HNO3 digestions. The data and experimental observations support the following conclusions: The DWPF Cold Chem Method seemed to be effective at dissolving initial species of radioactive sludge, but concurrent precipitation of insoluble mixed-metal fluoride salts was observed in both the Tank 7 and Tank 51 Cold Chem digestion solutions. Complete dissolution, by visual observation, was achieved with a modified hot HF-HNO3 digestion. This was done as an alternative to the DWPF room-temperature acid dissolution.