The Influence of Dissolved hydrogen on Nickel Alloy SCC: A Window to Fundamental Insight

Morton, D.S. ; Attanasio, S.A. ; Young, G.A. ; Andresen, P.L. ; Angeliu, T.M.

Lockheed Martin

关键词: Corrosion;    Crack Propagation;    Alloys;    Testing;    Transport;   

DOI  :  10.2172/821302
RP-ID  :  LM-00K059
RP-ID  :  AC 12-00-SN39357
RP-ID  :  821302

美国|英语

来源: UNT Digital Library

【 摘 要 】

Prior stress corrosion crack growth rate (SCCGR) testing of nickel alloys as a function of the aqueous hydrogen concentration (i.e., the concentration of hydrogen dissolved in the water) has identified different functionalities at 338 and 360 C. These SCCGR dependencies have been uniquely explained in terms of the stability of nickel oxide. The present work evaluates whether the influence of aqueous hydrogen concentration on SCCGR is fundamentally due to effects on hydrogen absorption and/or corrosion kinetics. Hydrogen permeation tests were conducted to measure hydrogen pickup in and transport through the metal. Repassivation tests were performed in an attempt to quantify the corrosion kinetics. The aqueous hydrogen concentration dependency of these fundamental parameters (hydrogen permeation, repassivation) has been used to qualitatively evaluate the film-rupture/oxidation (FRO) and hydrogen assisted cracking (HAC) SCC mechanisms. This paper discusses the conditions that must be imposed upon these mechanisms to describe the known nickel alloy SCCGR aqueous hydrogen concentration functionality. Specifically, the buildup of hydrogen within Alloy 600 (measured through permeability) does not exhibit the same functionality as SCC with respect to the aqueous hydrogen concentration. This result implies that if HAC is the dominant SCC mechanism, then corrosion at isolated active path regions (i.e., surface initiation sites or cracks) must be the source of localized elevated detrimental hydrogen. Repassivation tests showed little temperature sensitivity over the range of 204 to 360 C. This result implies that for either the FRO or the HAC mechanism, corrosion processes (e.g., at a crack tip, in the crack wake, or on surfaces external to the crack) cannot by themselves explain the strong temperature dependence of nickel alloy SCC.