Radiological Design Summary Report for TRU Vent and Purge Process

Taus, L.B.

Savannah River Site (S.C.)

关键词: Alpha-Bearing Wastes;    Radiation Protection;    Ventilation;    12 Management Of Radioactive Wastes, And Non-Radioactive Wastes From Nuclear Facilities;    Containers;   

DOI  :  10.2172/821177
RP-ID  :  S-ESR-E-0001
RP-ID  :  AC09-96SR18500
RP-ID  :  821177

美国|英语

来源: UNT Digital Library

【 摘 要 】

This report contains top-level requirements for the various areas of radiological protection for workers. Detailed quotations of the requirements for applicable regulatory documents can be found in the accompanying Implementation Guide. For the purposes of demonstrating compliance with these requirements, per Engineering Standard 01064, shall consider / shall evaluate indicates that the designer must examine the requirement for the design and either incorporate or provide a technical justification as to why the requirement is not incorporated. The Transuranic Vent and Purge process is not a project, but is considered a process change. This process has been performed successfully by Solid Waste on lower activity TRU drums. This summary report applies a graded approach and describes how the Transuranic Vent and Purge process meets each of the applicable radiological design criteria and requirements specified in Manual WSRC-TM-95-1, Engineering Standard Number 01064.