Regulatory issues affecting management of produced water from coal bed methane wells.

Veil, J. A.

Argonne National Laboratory

关键词: Surface Waters;    Methane;    Management;    Coal Seams;    01 Coal, Lignite, And Peat;   

DOI  :  10.2172/819453
RP-ID  :  ANL/EA/RP-106984
RP-ID  :  W-31-109-ENG-38
RP-ID  :  819453

美国|英语

来源: UNT Digital Library

【 摘 要 】

Coal bed methane (CBM) wells are being developed in increasing numbers throughout the United States. These are wells that are drilled into coal seams to withdraw ground water (produced water) to reduce the hydrostatic pressure on the coal seam. The reduced pressure allows methane gas to migrate to the well bore where it moves to the surface and is collected. Where possible, operators prefer to discharge the produced water into nearby streams, rivers, or other surface water bodies. Depending on the chemical characteristics of the produced water, different levels of treatment are applied to the produced water before discharge. In some locations, produced water cannot be discharged and is injected, reused, or evaporated. Although the CBM industry is producing ''natural'' gas, such gas may not necessarily be covered under the existing national regulations for discharges from the oil and gas industry. This paper describes the existing national discharge regulations, the ways in which CBM produced water is currently being managed, the current CBM discharge permitting practices, and how these options might change as the volume of produced water increases because of the many new wells being developed.