Reduction in Defect Content of ODS Alloys

Ritherdon, J.

Oak Ridge National Laboratory

关键词: Intermetallic Compounds;    36 Materials Science;    Iron Base Alloys;    Aluminium Alloys;    Defects;   

DOI  :  10.2172/814391
RP-ID  :  ORNL/SUB/98-SY382/03
RP-ID  :  AC05-00OR22725
RP-ID  :  814391

美国|英语

来源: UNT Digital Library

【 摘 要 】

The work detailed within this report is a continuation of earlier work carried out under contract number 1DX-SY382V. The earlier work comprises a literature review of the sources and types of defects found principally in Fe-based ODS alloys as well as experimental work designed to identify defects in the prototype ODS-Fe{sub 3}Al alloy, deduce their origins and to recommend methods of defect reduction. The present work is an extension of the experimental work already reported and concentrates on means of reduction of defects already identified rather than the search for new defect types. This report also includes results gathered during powder separation trials, conducted by the University of Groningen, Netherlands and coordinated by the University of Liverpool, involving the separation of different metallic powders in terms of their differing densities. The scope and objectives of the present work were laid out in the technical proposal ''Reduction in Defect Content in ODS Alloys-III''. All the work proposed in the ''Statement of Work'' section of the technical proposal has been carried out and all work extra to the ''Statement of Work'' falls within the context of an ODS-Fe{sub 3}Al alloy of improved overall quality and potential creep performance in the consolidated form. The outturn of the experimental work performed is reported in the following sections.