OZONE TREATMENT OF SOLUBLE ORGANICS IN PRODUCED WATER

Klasson, KT

Oak Ridge National Laboratory

关键词: 02 Petroleum;    Irradiation;    Oxidation;    Petroleum Industry;    Production;   

DOI  :  10.2172/814273
RP-ID  :  ORNL/TM-2002/5
RP-ID  :  AC05-00OR22725
RP-ID  :  814273

美国|英语

来源: UNT Digital Library

【 摘 要 】

This project was an extension of previous research to improve the applicability of ozonation and will help address the petroleum-industry problem of treating produced water containing soluble organics. The goal of this project was to maximize oxidation of hexane-extractable organics during a single-pass operation. The project investigated: (1) oxidant production by electrochemical and sonochemical methods, (2) increasing the mass transfer rate in the reactor by forming microbubbles during ozone injection into the produced water, and (3) using ultraviolet irradiation to enhance the reaction if needed. Several types of methodologies for treatment of soluble organics in synthetic and actual produced waters have been performed. The technologies tested may be categorized as follows: (1) Destruction via sonochemical oxidation at different pH, salt concentration, ultraviolet irradiation, and ferrous iron concentrations. (2) Destruction via ozonation at different pH, salt concentration, hydrogen peroxide concentrations, ultraviolet irradiation, temperature, and reactor configurations.