On-machine ultrasonic sensors for paper stiffness. Final report

Hall, Maclin S. ; Jackson, Theodore G. ; Brown, Ernest (Andy)

Institute of Paper Science and Technology, Atlanta, GA (United States)

关键词: Paper;    Mechanical Properties;    Measuring Equipment;    Correlations;    Quality Control;   

DOI  :  10.2172/807457
RP-ID  :  DOE/CE-41156-Final
RP-ID  :  FCO2-95CE41156
RP-ID  :  807457

美国|英语

来源: UNT Digital Library

【 摘 要 】

This final report presents the results of a 5-year effort by the Institute of Paper Science and Technology (IPST) and its participating partners. The objective of this work was to develop and demonstrate sensors capable of measuring the velocity of ultrasound in the out-of-plane (ZD) and in-plane directions of paper as it is being produced on a commercial paper machine. On-machine ultrasonic measurements can be used to determine various mechanical properties of paper and to monitor process status and product quality. This report first presents a review of the background and potential benefits of on-machine ultrasonic measurements, then summarizes the results of previous work. The ZD measurement system involving the use of ultrasonic transducers in fluid-filled wheels is described in detail, including the method of measurement, the wheel mounting hardware, the on-machine operation, and an overview of the system software. Mill-trial results from two bump tests when producing 69{number_sign} and 55{number_sign} linearboard are presented. For the 69{number_sign} trial the correlation of ZD transit time with plybond and with ZDT (Z-direction tensile or internal bond strength) was greater than 0.8 (R squared). Also observed were ZD stiffness responses to refining and to calendering. ABB Industrial Systems Inc. was responsible for the in-plane sensor. A paper describing ABB's sensor and mill experience is appended.