Making the Connection Between Microstructure and Mechanics

HOLM, ELIZABETH A. ; BATTAILE, CORBETT C. ; FANG, HUEI ELIOT ; BUCHHEIT, THOMAS E. ; WELLMAN, GERALD W.

Sandia National Laboratories

关键词: Hardening;    Mechanical Properties;    Grain Growth;    Plasticity;    36 Materials Science;   

DOI  :  10.2172/807062
RP-ID  :  SAND2002-4231
RP-ID  :  AC04-94AL85000
RP-ID  :  807062

美国|英语

来源: UNT Digital Library

【 摘 要 】

The purpose of microstructural control is to optimize materials properties. To that end, they have developed sophisticated and successful computational models of both microstructural evolution and mechanical response. However, coupling these models to quantitatively predict the properties of a given microstructure poses a challenge. This problem arises because most continuum response models, such as finite element, finite volume, or material point methods, do not incorporate a real length scale. Thus, two self-similar polycrystals have identical mechanical properties regardless of grain size, in conflict with theory and observations. In this project, they took a tiered risk approach to incorporate microstructure and its resultant length scales in mechanical response simulations. Techniques considered include low-risk, low-benefit methods, as well as higher-payoff, higher-risk methods. Methods studied include a constitutive response model with a local length-scale parameter, a power-law hardening rate gradient near grain boundaries, a local Voce hardening law, and strain-gradient polycrystal plasticity. These techniques were validated on a variety of systems for which theoretical analyses and/or experimental data exist. The results may be used to generate improved constitutive models that explicitly depend upon microstructure and to provide insight into microstructural deformation and failure processes. Furthermore, because mechanical state drives microstructural evolution, a strain-enhanced grain growth model was coupled with the mechanical response simulations. The coupled model predicts both properties as a function of microstructure and microstructural development as a function of processing conditions.