Weigh Station and Grid Plate Testing

PAJUNEN, A.L.

Fluor Hanford, Inc.

关键词: Testing;    Scrap;    N-Reactor;    22 General Studies Of Nuclear Reactors;    Cleaning;   

DOI  :  10.2172/803036
RP-ID  :  SNF-6030, Rev.0
RP-ID  :  AC06-96RL13200
RP-ID  :  803036

美国|英语

来源: UNT Digital Library

【 摘 要 】

The purpose of this test is to verify that the Shortened Fuel Canister Hook with Certified Scale (i.e. Weigh Station) can be used to weigh an empty canister from the Canister Well and the empty Primary Cleaning Machine (PCM) Strainer Basket from the process table. Drawing H-1-84835, ''Canister Handling Hook for Fuel Retrieval System Process Table,'' provides details of the Shortened Fuel Canister Hook. It is also necessary to verify that the grid plate can be lifted and tilted over a canister in the canister well. This testing shall be performed before N Reactor fuel is processed through the FRS in Phase 3. The Phase 3 Test will repeatedly weigh fuel and scrap canisters and the PCM strainer basket containing N Reactor fuel (Pajunen, et. al, 2000). Advance testing of this weigh station will ensure that accurate fuel weight data can be recorded in the Phase 3 Test. This document satisfies the requirements EN-6-031-00, ''Testing Process'' for a test plan, test specification and test procedure.