Chem-Prep PZT 95/5 for Neutron Generator Applications: Particle Size Distribution Comparison of Development and Production-Scale Powders

SIPOLA, DIANA L. ; VOIGT, JAMES A. ; LOCKWOOD, STEVEN J. ; RODMAN-GONZALES, EMILY D.

Sandia National Laboratories

关键词: Power Supplies;    Ferroelectric Materials;    36 Materials Science;    Pzt;    Production;   

DOI  :  10.2172/801386
RP-ID  :  SAND2002-2065
RP-ID  :  AC04-94AL85000
RP-ID  :  801386

美国|英语

来源: UNT Digital Library

【 摘 要 】

The Materials Chemistry Department 1846 has developed a lab-scale chem-prep process for the synthesis of PNZT 95/5, a ferroelectric material that is used in neutron generator power supplies. This process (Sandia Process, or SP) has been successfully transferred to and scaled by Department 14192 (Ceramics and Glass Department), (Transferred Sandia Process, or TSP), to meet the future supply needs of Sandia for its neutron generator production responsibilities. In going from the development-size SP batch (1.6 kg/batch) to the production-scale TSP powder batch size (10 kg/batch), it was important that it be determined if the scaling process caused any ''performance-critical'' changes in the PNZT 95/5 being produced. One area where a difference was found was in the particle size distributions of the calcined PNZT powders. Documented in this SAND report are the results of an experimental study to determine the origin of the differences in the particle size distribution of the SP and TSP powders.