Boronization on NSTX using Deuterated Trimethylboron

Blanchard, W.R. ; Gernhardt, R.C. ; Kugel, H.W. ; LaMarche, P.H.

Princeton University. Plasma Physics Laboratory.

关键词: Boron;    Pumping;    70 Plasma Physics And Fusion Technology;    Glow Discharges;    Impurities;   

DOI  :  10.2172/793031
RP-ID  :  PPPL-3655
RP-ID  :  AC02-76CH03073
RP-ID  :  793031

美国|英语

来源: UNT Digital Library

【 摘 要 】

Boronization on the National Spherical Torus Experiment (NSTX) has proved to be quite beneficial with increases in confinement and density, and decreases in impurities observed in the plasma. The boron has been applied to the interior surfaces of NSTX, about every 2 to 3 weeks of plasma operation, by producing a glow discharge in the vacuum vessel using deuterated trimethylboron (TMB) in a 10% mixture with helium. Special NSTX requirements restricted the selection of the candidate boronization method to the use of deuterated boron compounds. Deuterated TMB met these requirements, but is a hazardous gas and special care in the execution of the boronization process is required. This paper describes the existing GDC, Gas Injection, and Torus Vacuum Pumping System hardware used for this process, the glow discharge process, and the automated control system that allows for remote operation to maximize both the safety and efficacy of applying the boron coating. The administrative requirements and the detailed procedure for the setup, operation and shutdown of the process are also described.