Modification of TOUGH2 to Include the Dusty Gas Model for Gas Diffusion

WEBB, STEPHEN W.

Sandia National Laboratories

关键词: Diffusion;    Carbon Dioxide;    Computerized Simulation;    Gases;    Porous Materials;   

DOI  :  10.2172/789524
RP-ID  :  SAND2001-3214
RP-ID  :  AC04-94AL85000
RP-ID  :  789524

美国|英语

来源: UNT Digital Library

【 摘 要 】

The GEO-SEQ Project is investigating methods for geological sequestration of CO{sub 2}. This project, which is directed by LBNL and includes a number of other industrial, university, and national laboratory partners, is evaluating computer simulation methods including TOUGH2 for this problem. The TOUGH2 code, which is a widely used code for flow and transport in porous and fractured media, includes simplified methods for gas diffusion based on a direct application of Fick's law. As shown by Webb (1998) and others, the Dusty Gas Model (DGM) is better than Fick's Law for modeling gas-phase diffusion in porous media. In order to improve gas-phase diffusion modeling for the GEO-SEQ Project, the EOS7R module in the TOUGH2 code has been modified to include the Dusty Gas Model as documented in this report. In addition, the liquid diffusion model has been changed from a mass-based formulation to a mole-based model. Modifications for separate and coupled diffusion in the gas and liquid phases have also been completed. The results from the DGM are compared to the Fick's law behavior for TCE and PCE diffusion across a capillary fringe. The differences are small due to the relatively high permeability (k = 10{sup -11} m{sup 2}) of the problem and the small mole fraction of the gases. Additional comparisons for lower permeabilities and higher mole fractions may be useful.