Theoretical Minimum Energies to Produce Steel for Selected Conditions

Fruehan, R. J. ; Fortini, O. ; Paxton, H. W. ; Brindle, R.

Carnegie-Mellon University

关键词: Energy Consumption;    Electric Arcs;    Carbon Dioxide;    Scrap;    36 Materials Science;   

DOI  :  10.2172/769470
RP-ID  :  NONE
RP-ID  :  NONE
RP-ID  :  769470

美国|英语

来源: UNT Digital Library

【 摘 要 】

The energy used to produce liquid steel in today's integrated and electric arc furnace (EAF) facilities is significantly higher than the theoretical minimum energy requirements. This study presents the absolute minimum energy required to produce steel from ore and mixtures of scrap and scrap alternatives. Additional cases in which the assumptions are changed to more closely approximate actual operating conditions are also analyzed. The results, summarized in Table E-1, should give insight into the theoretical and practical potentials for reducing steelmaking energy requirements. The energy values have also been converted to carbon dioxide (CO{sub 2}) emissions in order to indicate the potential for reduction in emissions of this greenhouse gas (Table E-2). The study showed that increasing scrap melting has the largest impact on energy consumption. However, scrap should be viewed as having ''invested'' energy since at one time it was produced by reducing ore. Increasing scrap melting in the BOF mayor may not decrease energy if the ''invested'' energy in scrap is considered.