Local Heat Transfer and CHF for Subcooled Flow Boiling - Annual Report 1993

Boyd, Dr. Ronald D.

Prairie View A and M University, Prairie View, TX (United States)

关键词: Heat Transfer;    Liquid Metals;    Critical Heat Flux;    70 Plasma Physics And Fusion Technology;    Subcooled Boiling;   

DOI  :  10.2172/769387
RP-ID  :  NONE
RP-ID  :  FG03-92ER54189
RP-ID  :  769387

美国|英语

来源: UNT Digital Library

【 摘 要 】

Subcooled flow boiling in heated coolant channels is an important heat transfer enhancement technique in the development of fusion reactor components, where high heat fluxes must be accommodated. As energy fluxes increase in magnitude, additional emphasis must be devoted to enhancing techniques such as sub cooling and enhanced surfaces. In addition to subcooling, other high heat flux alternatives such as high velocity helium and liquid metal cooling have been considered as serious contenders. Each technique has its advantages and disadvantages [1], which must be weighed as to reliability and reduced cost of fusion reactor components. Previous studies [2] have set the stage for the present work, which will concentrate on fundamental thermal hydraulic issues associated with the h-international Thermonuclear Experimental Reactor (ITER) and the Engineering Design Activity (EDA). This proposed work is intended to increase our understanding of high heat flux removal alternatives as well as our present capabilities by: (1) including single-side heating effects in models for local predictions of heat transfer and critical heat flux; (2) inspection of the US, Japanese, and other possible data sources for single-side heating, with the aim of exploring possible correlations for both CHF and local heat transfer; and (3) assessing the viability of various high heat flux removal techniques. The latter task includes: (a) sub-cooled water flow boiling with enhancements such as twisted tapes, and hypervapotrons, (b) high velocity helium cooling, and (c) other potential techniques such as liquid metal cooling. This assessment will increase our understanding of: (1) hypervapotron heat transfer via fins, flow recirculation, and flow oscillation, and (2) swirl flow. This progress report contains selective examples of ongoing work. Section II contains an extended abstract, which is part of and evolving technical paper on single-side f heating. Section III describes additional details which will be included in the first year of work. Section IV summarizes past and anticipated international interactions with investigators from other countries. Finally, Section V gives summaries of two conceptual experiments which are planned for the second and third years.