The Preparation and Characterization of INTEC Phase 2b Composition Variation Study Glasses

Staples, B. A. ; Scholes, B. A. ; Torres, L. L. ; Musick, C. A. ; Boyle, B. R. ; Peeler, D. K. ; Vienna, J. D.

Idaho National Engineering and Environmental Laboratory

关键词: Potassium;    Idaho National Engineering Laboratory;    Glass;    12 Management Of Radioactive Wastes, And Non-Radioactive Wastes From Nuclear Facilities;    Flowsheet;   

DOI  :  10.2172/768819
RP-ID  :  INEEL/EXT-99-01322
RP-ID  :  AC07-99ID13727
RP-ID  :  768819

美国|英语

来源: UNT Digital Library

【 摘 要 】

The second phase of the composition variation study (CVS) for the development of glass compositions to immobilize Idaho Nuclear Technology and Engineering Center (INTEC) high level wastes (HLW) is complete. This phase of the CVS addressed waste composition of high activity waste fractions (HAW) from the initial separations flowsheet. Updated estimates if INTEC calcined HLW compositions and of high activity waste fractions proposed to be separated from dissolved calcine were used as the waste component for this CVS phase. These wastes are of particular interest because high aluminum, calcium, zirconium, fluorine, potassium, and low iron and sodium content places them outside the vitrification experience in the Department of Energy complex. Because of the presence of calcium and fluorine, two major zirconia calcine components not addressed in Phase I, a series of scooping tests, designated Phase 2a, were performed. The results of these tests provided information on the effects of calcium and fluoride solubility and their impacts on product properties and composition boundary information for Phase 2b. Details and results of Phase 2a are reported separately. Through application of statistical techniques and the results of Phase 2a, a test matrix was defined for Phase 2b of the CVS. From this matrix, formulations were systematically selected for preparation and characterization with respect to visual and optical homogeneity, viscosity as a function of melt temperature, liquidus temperature (TL), and leaching properties based on response to the product consistency test. The results of preparing and characterizing the Phase 2b glasses are presented in this document. Based on the results, several formulations investigated have suitable properties for further development. A full analysis of the composition-product characteristic relationship of glasses being developed for immobilizing INTEC wastes will be performed at the completion of composition-property relationship phases of the CVS.