BNFL Report Glass Formers Characterization

Schumacher, R.F.

Savannah River Site (S.C.)

关键词: Physical Properties;    Waste Forms;    Radioactive Waste Processing;    Cost;    Zircon;   

DOI  :  10.2172/759137
RP-ID  :  BNF-003-98-0188,Rev.1
RP-ID  :  AC09-96SR18500
RP-ID  :  759137

美国|英语

来源: UNT Digital Library

【 摘 要 】

The objective of this task was to obtain powder property data on candidate glass former materials, sufficient to guide conceptual design and estimate the cost of glass former handling facilities as requested under Part B1 of BNFL Technical and Development Support. Twenty-nine glass forming materials were selected and obtained from vendors for the characterization of their physical properties, durability in caustic solution, and powder flow characteristics. A glass former was selected based on the characterization for each of the ten oxide classes required for Envelope A, B, and C mixtures. Three blends (A, B, and C) were prepared based on formulations provided by Vitreous State Laboratory and evaluated with the same methods employed for the glass formers. The properties obtained are presented in a series of attached Tables. It was determined that five of the ten glass formers, (kyanite, iron oxide, titania, zircon, and zinc oxide) have the potential to cause some level of solids f low problems. The problems might include arching or ratholing in the silo/hopper. In addition, all of the blends may require consideration for their handling.