Indirect Drive Warm-Loaded Ignition Target Design

Bernat, T P ; Gibson, C R

Lawrence Livermore National Laboratory

关键词: 36 Materials Science;    Cryostats;    42 Engineering;    Targets;    Ignition;   

DOI  :  10.2172/15014736
RP-ID  :  UCRL-TR-206424
RP-ID  :  W-7405-ENG-48
RP-ID  :  15014736

美国|英语

来源: UNT Digital Library

【 摘 要 】

This document summarizes the Indirect Drive Warm-Loaded Ignition Target design. These targets either use a fill tube or the capsule is strong enough to withstand the room temperature pressure of the DT fuel. Only features that affect the design of the NIF Cryogenic Target System (NCTS) are presented. The design presented is the current thinking and may evolve further. The NCTS should be designed to accommodate a range of targets and target scales, as described here. The interface location between the target and the NCTS cryostat is at the target base / gripper joint, the tamping gas gland/gland joint, and the electrical plug/receptacle joint.