Acoustic Filtration, Fractionation, and Mixing in Microfluidic Systems

Wang, A ; Fisher, K

Lawrence Livermore National Laboratory

关键词: Plastics;    Filtration;    Acoustics;    Simulation;    42 Engineering;   

DOI  :  10.2172/15006208
RP-ID  :  UCRL-ID-147116
RP-ID  :  W-7405-ENG-48
RP-ID  :  15006208

美国|英语

来源: UNT Digital Library

【 摘 要 】

This project is concerned with the research and development of a technique to manipulate small particles using acoustic energy coupled into a fluid filled plastic or glass sample chamber. These resulting miniaturized systems combine high functionality with an inexpensive, disposable sample chamber. Our approach to this problem is based on a combination of sophisticated modeling tools in conjunction with laboratory experiments. The design methodology is summarized in Figure 1. The process begins by investigating a wide range of device parameters using a one-dimensional analytical approximation. The results of these initial parameter studies are incorporated into a sophisticated three-dimensional multi-physics finite element code. From these simulations the optimized designs are prototyped and experimentally tested. The results of the experimental observations are then used to improve analytical approximations and the process is repeated as necessary.