Simulation of one-minute power output from utility-scale photovoltaic generation systems.

Stein, Joshua S. ; Ellis, Abraham ; Hansen, Clifford W.

Sandia National Laboratories

关键词: Capacity;    99 General And Miscellaneous//Mathematics, Computing, And Information Science;    Simulation;    Radiant Flux Density;    Sensors;   

DOI  :  10.2172/1029801
RP-ID  :  SAND2011-5529
RP-ID  :  AC04-94AL85000
RP-ID  :  1029801

美国|英语

来源: UNT Digital Library

【 摘 要 】

We present an approach to simulate time-synchronized, one-minute power output from large photovoltaic (PV) generation plants in locations where only hourly irradiance estimates are available from satellite sources. The approach uses one-minute irradiance measurements from ground sensors in a climatically and geographically similar area. Irradiance is translated to power using the Sandia Array Performance Model. Power output is generated for 2007 in southern Nevada are being used for a Solar PV Grid Integration Study to estimate the integration costs associated with various utility-scale PV generation levels. Plant designs considered include both fixed-tilt thin-film, and single-axis-tracked polycrystalline Si systems ranging in size from 5 to 300 MW{sub AC}. Simulated power output profiles at one-minute intervals were generated for five scenarios defined by total PV capacity (149.5 MW, 222 WM, 292 MW, 492 MW, and 892 MW) each comprising as many as 10 geographically separated PV plants.