Simulations of neutron multiplicity measurements with MCNP-PoliMi.

Mattingly, John K. ; Pozzi, Sara A. (University of Michigan) ; Clarke, Shaun D. (University of Michigan) ; Dennis, Ben D. (University of Michigan) ; Miller, Eric C.

Sandia National Laboratories

关键词: 98 Nuclear Disarmament, Safeguards, And Physical Protection;    Dead Time;    Multiplicity;    Detectors.;    Nuclear Safeguards.;   

DOI  :  10.2172/1028936
RP-ID  :  SAND2010-6830
RP-ID  :  AC04-94AL85000
RP-ID  :  1028936

美国|英语

来源: UNT Digital Library

【 摘 要 】

The heightened focus on nuclear safeguards and accountability has increased the need to develop and verify simulation tools for modeling these applications. The ability to accurately simulate safeguards techniques, such as neutron multiplicity counting, aids in the design and development of future systems. This work focuses on validating the ability of the Monte Carlo code MCNPX-PoliMi to reproduce measured neutron multiplicity results for a highly multiplicative sample. The benchmark experiment for this validation consists of a 4.5-kg sphere of plutonium metal that was moderated by various thicknesses of polyethylene. The detector system was the nPod, which contains a bank of 15 3He detectors. Simulations of the experiments were compared to the actual measurements and several sources of potential bias in the simulation were evaluated. The analysis included the effects of detector dead time, source-detector distance, density, and adjustments made to the value of {nu}-bar in the data libraries. Based on this analysis it was observed that a 1.14% decrease in the evaluated value of {nu}-bar for 239Pu in the ENDF-VII library substantially improved the accuracy of the simulation.