Advanced Engine/Aftertreatment System R&D

Pihl, J. ; West, B. ; Toops, T. ; Adelman, B. (Navistar, Inc.) ; Derybowski, E. (Navistar, Inc.)

Oak Ridge National Laboratory

关键词: Efficiency;    Hydrocarbons;    Engines;    Oxidation;    Regeneration;   

DOI  :  10.2172/1027864
RP-ID  :  ORNL00-0605
RP-ID  :  DE-AC05-00OR22725
RP-ID  :  1027864

美国|英语

来源: UNT Digital Library

【 摘 要 】

Navistar and ORNL established this CRADA to develop diesel engine aftertreatment configurations and control strategies that could meet emissions regulations while maintaining or improving vehicle efficiency. The early years of the project focused on reducing the fuel penalty associated with lean NOx trap (LNT, also known as NOx adsorber catalyst) regeneration and desulfation. While Navistar pursued engine-based (in-cylinder) approaches to LNT regeneration, complementary experiments at ORNL focused on in-exhaust fuel injection. ORNL developed a PC-based controller for transient electronic control of EGR valve position, intake throttle position, and actuation of fuel injectors in the exhaust system of a Navistar engine installed at Oak Ridge. Aftertreatment systems consisting of different diesel oxidation catalysts (DOCs) in conjunction with a diesel particle filter and LNT were evaluated under quasi-steady-state conditions. Hydrocarbon (HC) species were measured at multiple locations in the exhaust system with Gas chromatograph mass spectrometry (GC-MS) and Fourier transform infrared (FTIR) spectroscopy.