Secondary Waste Form Screening Test Results—THOR® Fluidized Bed Steam Reforming Product in a Geopolymer Matrix

Pires, Richard P. ; Westsik, Joseph H. ; Serne, R. Jeffrey ; Mattigod, Shas V. ; Golovich, Elizabeth C. ; Valenta, Michelle M. ; Parker, Kent E.

Pacific Northwest National Laboratory (U.S.)

关键词: Leaching;    Capacity;    Liquid Wastes;    Fluidized Bed Steam Reforming Product In A Geopolymer Matrix;    Fluidized Beds;   

DOI  :  10.2172/1027188
RP-ID  :  PNNL-20551
RP-ID  :  AC05-76RL01830
RP-ID  :  1027188

美国|英语

来源: UNT Digital Library

【 摘 要 】

Screening tests are being conducted to evaluate waste forms for immobilizing secondary liquid wastes from the Hanford Tank Waste Treatment and Immobilization Plant (WTP). Plans are underway to add a stabilization treatment unit to the Effluent Treatment Facility to provide the needed capacity for treating these wastes from WTP. The current baseline is to use a Cast Stone cementitious waste form to solidify the wastes. Through a literature survey, DuraLith alkali-aluminosilicate geopolymer, fluidized-bed steam reformation (FBSR) granular product encapsulated in a geopolymer matrix, and a Ceramicrete phosphate-bonded ceramic were identified both as candidate waste forms and alternatives to the baseline. These waste forms have been shown to meet waste disposal acceptance criteria, including compressive strength and universal treatment standards for Resource Conservation and Recovery Act (RCRA) metals (as measured by the toxicity characteristic leaching procedure [TCLP]). Thus, these non-cementitious waste forms should also be acceptable for land disposal. Information is needed on all four waste forms with respect to their capability to minimize the release of technetium. Technetium is a radionuclide predicted to be in the secondary liquid wastes in small quantities, but the Integrated Disposal Facility (IDF) risk assessment analyses show that technetium, even at low mass, produces the largest contribution to the estimated IDF disposal impacts to groundwater.