LITERATURE REVIEW OF BORIC ACID SOLUBILITY DATA

Crapse, K. ; Kyser, E.

Savannah River Site (S.C.)

关键词: Chemical Reactions;    Waste Processing;    Sodium Hydroxides;    Boric Acid;    37 Inorganic, Organic, Physical And Analytical Chemistry;   

DOI  :  10.2172/1025802
RP-ID  :  SRNL-STI-2011-00578
RP-ID  :  DE-AC09-08SR22470
RP-ID  :  1025802

美国|英语

来源: UNT Digital Library

【 摘 要 】

A new solvent system is being evaluated for use in the Modular Caustic-Side Solvent Extraction Unit (MCU) and in the Salt Waste Processing Facility (SWPF). The new system replaces the current dilute nitric acid strip solution with 0.01 M boric acid. This literature study is performed to determine if there is a potential for boric acid to crystallize in the lines with emphasis on the transfer lines to the Defense Waste Processing Facility. This report focuses on the aqueous phase chemistry of boric acid under conditions relevant to MCU and SWPF. Operating and transfer conditions examined for the purpose of this review include temperatures between 13 C (McLeskey, 2008) and 45 C (Fondeur, 2007) and concentrations from 0 to 3M in nitric acid as well as exposure of small amounts of entrained boric acid in the organic phase to the sodium hydroxide caustic wash stream. Experiments were also conducted to observe any chemical reactions and off-gas generation that could occur when 0.01 M boric acid solution mixes with 3 M nitric acid solution and vice versa. Based on the low concentration (0.01M) of boric acid in the MCU/SWPF strip acid and the moderate operating temperatures (13 C to 45 C), it is unlikely that crystallization of boric acid will occur in the acid strip solution under process or transfer conditions. Mixing experiments of boric and nitric acid show no measurable gas generation (< 1 cc of gas per liter of solution) under similar process conditions.