Impact Tensile Testing of Stainless Steels at Various Temperatures

D. K. Morton

关键词: ACCURACY;    COMPUTER CODES;    COMPUTERS;    CONSTRUCTION;    CONTAINERS;    DYNAMIC LOADS;    ENERGY ANALYSIS;    IMPACT TESTS;    NUCLEAR FUELS;    RADIOACTIVE MATERIALS;    STAINLESS STEELS;    STRAIN RATE;    STRAINS;    TESTING stainless steel;    strain;    strain rate;    various temperatures;   

DOI  :  10.2172/933178
RP-ID  :  INL/EXT-08-14082
PID  :  OSTI ID: 933178
Others  :  TRN: US0803784

学科分类：材料科学（综合）

美国|英语

来源: SciTech Connect

【 摘 要 】

Stainless steels are used for the construction of numerous spent nuclear fuel or radioactive material containers that may be subjected to high strains and moderate strain rates during accidental drop events. Mechanical characteristics of these base materials and their welds under dynamic loads in the strain rate range of concern (1 to 300 per second) are not well documented. However, research is being performed at the Idaho National Laboratory to quantify these characteristics. The work presented herein discusses tensile impact testing of dual-marked 304/304L and 316/316L stainless steel material specimens. Both base material and welded material specimens were tested at -20 oF, room temperature, 300 oF, and 600 oF conditions. Utilizing a drop weight impact test machine and 1/4-inch and 1/2-inch thick dog bone-shaped test specimens, a strain rate range of approximately 4 to 40 per second (depending on initial temperature conditions) was achieved. Factors were determined that reflect the amount of increased strain energy the material can absorb due to strain rate effects. Using the factors, elevated true stress-strain curves for these materials at various strain rates and temperatures were generated. By incorporating the strain rate elevated true stress-strain material curves into an inelastic finite element computer program as the defined material input, significant improvement in the accuracy of the computer analyses was attained. However, additional impact testing is necessary to achieve higher strain rates (up to 300 per second) before complete definition of strain rate effects can be made for accidental drop events and other similar energy-limited impulsive loads. This research approach, using impact testing and a total energy analysis methodology to quantify strain rate effects, can be applied to many other materials used in government and industry.