CO2 Separation Using Thermally Optimized Membranes: A Comprehensive Project Report (2000 - 2007)

J.R. Klaehn ; C.J. Orme ; E.S. Peterson ; T.A. Luther ; M.G. Jones ; A.K. Wertsching

关键词: ADDITIVES;    FLUCTUATIONS;    MEMBRANES;    PLASTICIZERS;    POLYAMIDES;    POLYMERS;    SOLUBILITY;    SOLVENTS;    TESTING CO2 Separation;    gas separation membranes;    high-performance polymers;    polybenzimidazole membranes;   

DOI  :  10.2172/928082
RP-ID  :  INL/EXT-07-12376
PID  :  OSTI ID: 928082
Others  :  TRN: US200815%%493

美国|英语

来源: SciTech Connect

【 摘 要 】

This is a complete (Fiscal Years 2000–2006) collection of the Idaho National Laboratory’s (INL) research and development contributions to the project, “CO2 Separation Using Thermally Optimized Membranes.” The INL scientific contribution to the project has varied due to the fluctuations in funding from year to year. The focus of the project was polybenzimidazole (PBI) membranes and developing PBI compounds (both substitution and blends) that provide good film formation and gas separation membranes. The underlying problem with PBI is its poor solubility in common solvents. Typically, PBI is dissolved in “aggressive” solvents, like N,N-dimethylacetamide (DMAc) and N methylpyrrolidone (NMP). The INL FY-03 research was directed toward making soluble N-substituted PBI polymers, where INL was very successful. Many different types of modified PBI polymers were synthesized; however, film formation proved to be a big problem with both unsubstituted and N-substituted PBIs. Therefore, INL researchers directed their attention to using plasticizers or additives to make the membranes more stable and workable. During the course of these studies, other high-performance polymers (like polyamides and polyimides) were found to be better materials, which could be used either by themselves or blends with PBI. These alternative high-performance polymers provided the best pathway forward for soluble high-temperature polymers with good stable film formation properties. At present, the VTEC polyimides (product of RBI, Inc.) are the best film formers that exhibit high-temperature resistance. INL’s gas testing results show VTEC polyimides have very good gas selectivities for both H2/CO2 and CO2/CH4. Overall, these high-performance polymers pointed towards new research areas where INL has gained a greater understanding of polymer film formation and gas separation. These studies are making possible a direct approach to stable polymer-based high-temperature gas separation membranes. This report is separated into several sections due to the complexity of the research and the variation with the development of better high-temperature, gas separation membranes. Several fiscal years are combined because the research and development efforts within those areas crossed fiscal year boundaries.