Predictions of H-mode performance in ITER

Budny, R. V. ; Andre, R. ; Bateman, G. ; Halpern, F. ; Kessel, C. E. ; Kritz, A. ; McCune, D.

关键词: ALPHA PARTICLES;    ANIONS;    AUXILIARY HEATING;    BEAM CURRENTS;    BEAM INJECTION;    CYCLOTRONS;    DIFFUSION;    ELECTRON TEMPERATURE;    FUSION YIELD;    HEATING;    HELIUM ASH;    ION TEMPERATURE;    NEUTRONS;    PHYSICS;    RECYCLING;    ROTATION;    SAWTOOTH OSCILLATIONS;    TORQUE;    TRITIUM Helium Ash;    Heating;    ICRF;    Fusion Reactors;    Injection;    Neutral Beam;    DT Plasma;    Fusion Power;    Computer Simulation;    Computer Codes;    Beam Plasma Interactions ITER;    Numerical Simulation;    Neutral Beams;   

DOI  :  10.2172/959402
RP-ID  :  PPPL-4300
PID  :  OSTI ID: 959402
Others  :  TRN: US0903063

学科分类：原子、分子光学和等离子物理

美国|英语

来源: SciTech Connect

【 摘 要 】

Time-dependent integrated predictive modeling is carried out using the PTRANSP code to predict fusion power and parameters such as alpha particle density and pressure in ITER H-mode plasmas. Auxiliary heating by negative ion neutral beam injection and ion cyclotron heating of He3 minority ions are modeled, and the GLF23 transport model is used in the prediction of the evolution of plasma temperature profiles. Effects of beam steering, beam torque, plasma rotation, beam current drive, pedestal temperatures, sawtooth oscillations, magnetic diffusion, and accumulation of He ash are treated self-consistently. Variations in assumptions associated with physics uncertainties for standard base-line DT H-mode plasmas (with Ip=15 MA, BTF=5.3 T, and Greenwald fraction=0.86) lead to a range of predictions for DT fusion power PDT and quasi-steady state fusion QDT (≡ PDT/Paux). Typical predictions assuming Paux = 50-53 MW yield PDT = 250- 720 MW and QDT = 5 - 14. In some cases where Paux is ramped down or shut off after initial flat-top conditions, quasi-steady QDT can be considerably higher, even infinite. Adverse physics assumptions such as existence of an inward pinch of the helium ash and an ash recycling coefficient approaching unity lead to very low values for PDT. Alternative scenarios with different heating and reduced performance regimes are also considered including plasmas with only H or D isotopes, DT plasmas with toroidal field reduced 10 or 20%, and discharges with reduced beam voltage. In full-performance D-only discharges, tritium burn-up is predicted to generate central tritium densities up to 1016/m3 and DT neutron rates up to 5×1016/s, compared with the DD neutron rates of 6×1017/s. Predictions with the toroidal field reduced 10 or 20% below the planned 5.3 T and keeping the same q98, Greenwald fraction, and Βη indicate that the fusion yield PDT and QDT will be lower by about a factor of two (scaling as B3.5).