Low-Rank Coal Grinding Performance Versus Power Plant Performance

Rajive Ganguli ; Sukumar Bandopadhyay

关键词: BITUMINOUS COAL;    COAL;    COMBUSTION;    DISTRIBUTION;    EFFICIENCY;    GRINDING;    PARTICLE SIZE;    PERFORMANCE;    POWER PLANTS;    PULVERIZERS;   

DOI  :  10.2172/963349
RP-ID  :  None
PID  :  OSTI ID: 963349
Others  :  TRN: US200918%%76

美国|英语

来源: SciTech Connect

【 摘 要 】

The intent of this project was to demonstrate that Alaskan low-rank coal, which is high in volatile content, need not be ground as fine as bituminous coal (typically low in volatile content) for optimum combustion in power plants. The grind or particle size distribution (PSD), which is quantified by percentage of pulverized coal passing 74 microns (200 mesh), affects the pulverizer throughput in power plants. The finer the grind, the lower the throughput. For a power plant to maintain combustion levels, throughput needs to be high. The problem of particle size is compounded for Alaskan coal since it has a low Hardgrove grindability index (HGI); that is, it is difficult to grind. If the thesis of this project is demonstrated, then Alaskan coal need not be ground to the industry standard, thereby alleviating somewhat the low HGI issue (and, hopefully, furthering the salability of Alaskan coal). This project studied the relationship between PSD and power plant efficiency, emissions, and mill power consumption for low-rank high-volatile-content Alaskan coal. The emissions studied were CO, CO{sub 2}, NO{sub x}, SO{sub 2}, and Hg (only two tests). The tested PSD range was 42 to 81 percent passing 76 microns. Within the tested range, there was very little correlation between PSD and power plant efficiency, CO, NO{sub x}, and SO{sub 2}. Hg emissions were very low and, therefore, did not allow comparison between grind sizes. Mill power consumption was lower for coarser grinds.