Materials for Accelerator Technologies Beyond the Niobium Family

Cooley, Lance ; Larbalestier, David ; Ghosh, Arup ; Tollestrup, Alvin ; /Fermilab

关键词: ACCELERATORS;    CABLES;    CAVITIES;    CONSTRUCTION;    CRITICAL FIELD;    DIPOLES;    LINEAR ACCELERATORS;    MAGNETIC FIELDS;    MAGNETIC FLUX;    MAGNETS;    NANOSTRUCTURES;    NIOBIUM;    ORNL;    QUADRUPOLES;    RESEARCH PROGRAMS;    SUPERCONDUCTIVITY;    SUPERCONDUCTORS;    TRANSITION TEMPERATURE Accelerators;   

DOI  :  10.2172/970997
RP-ID  :  FERMILAB-FN-0846-TD
PID  :  OSTI ID: 970997
Others  :  TRN: US1001123

学科分类：核物理和高能物理

美国|英语

来源: SciTech Connect

【 摘 要 】

Three niobium-based materials make up the entire present portfolio of superconducting technology for accelerators: Nb-Ti and Nb{sub 3}Sn magnet wires and pure niobium for RF cavities. Because these materials are at a high level of maturity, limits imposed by the boundaries of their superconductivity constrain the energy reach of accelerators to several TeV. We sketch here a plan for targeted development of emerging higher field and higher temperature superconductors that could enable accelerators at significantly higher energies. Niobium-based superconductors are the crucial enablers of present accelerators. The Nb-Ti LHC dipole and quadrupole wires, with transition temperature T{sub c} of 9 K and upper critical field H{sub c2} of 15 T, represent the highest form of superconductor strand art: massive, quarter-ton conductor billets are drawn from 300 mm diameter to {approx}1 mm as a single, multi-kilometer-long piece, while retaining uniformity of the several thousand Nb-Ti filaments to within 5% at the scale of a few micrometers. Strands are twisted into fully transposed cables with virtually no loss, preserving a carefully tuned nanostructure that generates the high flux-pinning forces and high current densities to enable high magnetic fields. Nb{sub 3}Sn, with twice the T{sub c} and H{sub c2}, is now approaching this level of conductor art, where over the last 5 years the LHC Accelerator Research Program (LARP) and the Next European Dipole (NED) program have demonstrated that Nb{sub 3}Sn can be made into 4 meter long quadrupoles with 12 T fields and 250 T/m gradients. Linear accelerators at TJNAF, ORNL (SNS), and under construction for the European XFEL exploit niobium superconducting radio-frequency (SRF) technology, with gradients at {approx}20 MV/m. Tremendous research and development is underway to realize high-power goals for Project X at FNAL and for a possible ILC at 35 MV/m gradients. Despite these impressive achievements, the very maturity of these niobium-based technologies makes them incapable of additional leaps from the several-TeV scale. Nb-Ti is already nearly perfect and operates at the limit of the superconducting phase. Further perfection of Nb cavities and Nb{sub 3}Sn magnets might provide 50 % growth in energy, based on proof-of-principle demonstrations that approach theoretical limits, e.g. 52 MV/m gradient in re-entrant Nb cavities and 18 T dipoles made from Nb3Sn strand. However, operation close to superconducting margins is risky, and cost tradeoffs to execute such a high degrees of perfection are likely to be negative.