An Analysis of Testing Requirements for Fluoride Salt Cooled High Temperature Reactor Components

Holcomb, David Eugene¹  Cetiner, Sacit M¹  Flanagan, George F¹  Peretz, Fred J¹  Yoder Jr, Graydon L¹ 

[1] ORNL

关键词: flouride salt high-temperature reactor component;   

DOI  :  10.2172/970926
RP-ID  :  ORNL/TM-2009/297
PID  :  OSTI ID: 970926
Others  :  Other: AF3670700
Others  :  NEAF265

美国|英语

来源: SciTech Connect

【 摘 要 】

This report provides guidance on the component testing necessary during the next phase of fluoride salt-cooled high temperature reactor (FHR) development. In particular, the report identifies and describes the reactor component performance and reliability requirements, provides an overview of what information is necessary to provide assurance that components will adequately achieve the requirements, and then provides guidance on how the required performance information can efficiently be obtained. The report includes a system description of a representative test scale FHR reactor. The reactor parameters presented in this report should only be considered as placeholder values until an FHR test scale reactor design is completed. The report focus is bounded at the interface between and the reactor primary coolant salt and the fuel and the gas supply and return to the Brayton cycle power conversion system. The analysis is limited to component level testing and does not address system level testing issues. Further, the report is oriented as a bottom-up testing requirements analysis as opposed to a having a top-down facility description focus.