Study of Chemical Changes in Uranium Oxyfluoride Particles Progress Report March - October 2009

Kips, R ; Kristo, M ; Hutcheon, I

关键词: CHEMICAL COMPOSITION;    ELECTRON MICROSCOPY;    FLUORINE;    HUMIDITY;    HYDROLYSIS;    IAEA;    ION BEAMS;    ISOTOPE SEPARATION;    MOISTURE;    MORPHOLOGY;    OXYFLUORIDES;    PARTICLE SIZE;    PROGRESS REPORT;    SAFEGUARDS;    SPECTROSCOPY;    TRACE AMOUNTS;    URANIUM;    URANIUM HEXAFLUORIDE;    URANIUM OXIDES;    X-RAY SPECTROSCOPY;   

DOI  :  10.2172/1010399
RP-ID  :  LLNL-TR-420742
PID  :  OSTI ID: 1010399
Others  :  TRN: US1101933

美国|英语

来源: SciTech Connect

【 摘 要 】

Nuclear forensics relies on the analysis of certain sample characteristics to determine the origin and history of a nuclear material. In the specific case of uranium enrichment facilities, it is the release of trace amounts of uranium hexafluoride (UF{sub 6}) gas - used for the enrichment of uranium - that leaves a process-characteristic fingerprint. When UF{sub 6} gas interacts with atmospheric moisture, uranium oxyfluoride particles or particle agglomerates are formed with sizes ranging from several microns down to a few tens of nanometers. These particles are routinely collected by safeguards organizations, such as the International Atomic Energy Agency (IAEA), allowing them to verify whether a facility is compliant with its declarations. Spectrometric analysis of uranium particles from UF{sub 6} hydrolysis has revealed the presence of both particles that contain fluorine, and particles that do not. It is therefore assumed that uranium oxyfluoride is unstable, and decomposes to form uranium oxide. Understanding the rate of fluorine loss in uranium oxyfluoride particles, and the parameters that control it, may therefore contribute to placing boundaries on the particle's exposure time in the environment. Expressly for the purpose of this study, we prepared a set of uranium oxyfluoride particles at the Institute for Reference Materials and Measurements (EU-JRC-IRMM) from a static release of UF{sub 6} in a humid atmosphere. The majority of the samples was stored in controlled temperature, humidity and lighting conditions. Single particles were characterized by a suite of micro-analytical techniques, including NanoSIMS, micro-Raman spectrometry (MRS), scanning (SEM) and transmission (TEM) electron microscopy, energy-dispersive X-ray spectrometry (EDX) and focused ion beam (FIB). The small particle size was found to be the main analytical challenge. The relative amount of fluorine, as well as the particle chemical composition and morphology were determined at different stages in the ageing process, and immediately after preparation. This report summarizes our most recent findings for each of the analytical techniques listed above, and provides an outlook on what remains to be resolved. Additional spectroscopic and mass spectrometric measurements were carried out at Pacific Northwest National Laboratory, but are not included in this summary.