Attrition Resistant Fischer-Tropsch Catalysts Based on FCC Supports

Adeyiga, Adeyinka

关键词: CATALYSTS;    CATALYTIC CRACKING;    HYDROCARBONS;    IMPREGNATION;    PACKED BEDS;    X-RAY DIFFRACTION;   

DOI  :  10.2172/1003991
RP-ID  :  None
PID  :  OSTI ID: 1003991
Others  :  TRN: US201105%%1043

美国|英语

来源: SciTech Connect

【 摘 要 】

Commercial spent fluid catalytic cracking (FCC) catalysts provided by Engelhard and Albemarle were used as supports for Fe-based catalysts with the goal of improving the attrition resistance of typical F-T catalysts. Catalysts with the Ruhrchemie composition (100 Fe/5 Cu/4.2 K/25 spent FCC on mass basis) were prepared by wet impregnation. XRD and XANES analysis showed the presence of Fe{sub 2}O{sub 3} in calcined catalysts. FeC{sub x} and Fe{sub 3}O{sub 4} were present in the activated catalysts. The metal composition of the catalysts was analyzed by ICP-MS. F-T activity of the catalysts activated in situ in CO at the same conditions as used prior to the attrition tests was measured using a fixed bed reactor at T = 573 K, P = 1.38 MPa and H{sub 2}:CO ratio of 0.67. Cu and K promoted Fe supported over Engelhard provided spent FCC catalyst shows relatively good attrition resistance (8.2 wt% fines lost), high CO conversion (81%) and C{sub 5}+ hydrocarbons selectivity (18.3%).