Understanding and predicting soot generation in turbulent non-premixed jet flames.

Wang, Hai (University of Southern California, Los Angeles, CA) ; Kook, Sanghoon ; Doom, Jeffrey ; Oefelein, Joseph Charles ; Zhang, Jiayao ; Shaddix, Christopher R. ; Schefer, Robert W. ; Pickett, Lyle M.

关键词: BENZENE;    BURNERS;    CHEMISTRY;    COMBUSTION;    COMBUSTION PROPERTIES;    DIFFUSION;    ETHYLENE;    FLAMES;    GAS TURBINE ENGINES;    KINETICS;    LAMINAR FLAMES;    NUCLEATION;    RADIATIONS;    RADICALS;    SENSITIVITY;    SOOT;    THERMAL RADIATION;   

DOI  :  10.2172/1011219
RP-ID  :  SAND2010-7178
PID  :  OSTI ID: 1011219
Others  :  TRN: US201109%%408

学科分类：航空航天科学

美国|英语

来源: SciTech Connect

【 摘 要 】

This report documents the results of a project funded by DoD's Strategic Environmental Research and Development Program (SERDP) on the science behind development of predictive models for soot emission from gas turbine engines. Measurements of soot formation were performed in laminar flat premixed flames and turbulent non-premixed jet flames at 1 atm pressure and in turbulent liquid spray flames under representative conditions for takeoff in a gas turbine engine. The laminar flames and open jet flames used both ethylene and a prevaporized JP-8 surrogate fuel composed of n-dodecane and m-xylene. The pressurized turbulent jet flame measurements used the JP-8 surrogate fuel and compared its combustion and sooting characteristics to a world-average JP-8 fuel sample. The pressurized jet flame measurements demonstrated that the surrogate was representative of JP-8, with a somewhat higher tendency to soot formation. The premixed flame measurements revealed that flame temperature has a strong impact on the rate of soot nucleation and particle coagulation, but little sensitivity in the overall trends was found with different fuels. An extensive array of non-intrusive optical and laser-based measurements was performed in turbulent non-premixed jet flames established on specially designed piloted burners. Soot concentration data was collected throughout the flames, together with instantaneous images showing the relationship between soot and the OH radical and soot and PAH. A detailed chemical kinetic mechanism for ethylene combustion, including fuel-rich chemistry and benzene formation steps, was compiled, validated, and reduced. The reduced ethylene mechanism was incorporated into a high-fidelity LES code, together with a moment-based soot model and models for thermal radiation, to evaluate the ability of the chemistry and soot models to predict soot formation in the jet diffusion flame. The LES results highlight the importance of including an optically-thick radiation model to accurately predict gas temperatures and thus soot formation rates. When including such a radiation model, the LES model predicts mean soot concentrations within 30% in the ethylene jet flame.