Final Report on Utilization of TRU TRISO Fuel as Applied to HTR Systems Part I: Pebble Bed Reactors

Brian Boer ; Abderrafi M. Ougouag

关键词: ABSORPTION;    AMERICIUM;    BURNUP;    COATED FUEL PARTICLES;    COATINGS;    ENERGY RANGE;    FEEDBACK;    FUEL PARTICLES;    GRAPHITE;    ISOTOPES;    KERNELS;    NEUTRONS;    OPTIMIZATION;    PEBBLE BED REACTORS;    REACTIVITY COEFFICIENTS;    REPROCESSING;    SAFETY;    TARGETS;    TRANSIENTS;    URANIUM Deep Burn;    HTR;    Pebble Bed;    Transmutation;    TRISO;   

DOI  :  10.2172/1013722
RP-ID  :  INL/EXT-11-21436
PID  :  OSTI ID: 1013722
Others  :  TRN: US1102687

学科分类：核能源与工程

美国|英语

来源: SciTech Connect

【 摘 要 】

The Deep-Burn (DB) concept [ ] focuses on the destruction of transuranic nuclides from used light water reactor (LWR) fuel. These transuranic nuclides are incorporated into tri-isotopic (TRISO) coated fuel particles and used in gas-cooled reactors with the aim of a fractional fuel burnup of 60 to 70% in fissions per initial metal atom (FIMA). This high performance is expected through the use of multiple recirculation passes of the fuel in pebble form without any physical or chemical changes between passes. In particular, the concept does not call for reprocessing of the fuel between passes. In principle, the DB pebble bed concept employs the same reactor designs as the presently envisioned low-enriched uranium core designs, such as the 400 MWth Pebble Bed Modular Reactor (PBMR-400) [ ]. Although it has been shown in the previous Fiscal Year (FY) (2009) that a PuO2 fueled pebble bed reactor concept is viable, achieving a high fuel burnup while remaining within safety-imposed prescribed operational limits for fuel temperature, power peaking, and temperature reactivity feedback coefficients for the entire temperature range, is challenging. The presence of the isotopes 239Pu, 240Pu, and 241Pu that have resonances in the thermal energy range significantly modifies the neutron thermal energy spectrum as compared to a standard, UO2-fueled core. Therefore, the DB pebble bed core exhibits a relatively hard neutron energy spectrum. However, regions within the pebble bed that are near the graphite reflectors experience a locally softer spectrum. This can lead to power and temperature peaking in these regions. Furthermore, a shift of the thermal energy spectrum with increasing temperature can lead to increased absorption in the resonances of the fissile Pu isotopes. This can lead to a positive temperature reactivity coefficient for the graphite moderator under certain operating conditions. Regarding the coated particle performance, the FY 2009 investigations showed that no significant failure is to be expected for the reference fuel particle during normal operation. It was found, however, that the sensitivity of the coating stress to the CO production in the kernel was large. The CO production is expected to be higher in DB fuel than in UO2 fuel, but its exact level has a high uncertainty. Furthermore, in the fuel performance analysis transient conditions were not yet taken into account. The effort of this task in FY 2010 has focused on the optimization of the core to maximize the pebble discharge burnup level, while retaining its inherent safety characteristics. Using generic pebble bed reactor cores, this task will perform physics calculations to evaluate the capabilities of the pebble bed reactor to perform utilization and destruction of LWR used-fuel transuranics. The task will use established benchmarked models, and will introduce modeling advancements appropriate to the nature of the fuel considered (high transuranic [TRU] content and high burn-up). Accomplishments of this work include: ???Core analysis of a HTR-MODULE design loaded with Deep-Burn fuel. ???Core analysis of a HTR-MODULE design loaded with Deep-Burn fuel and Uranium. ???Core analysis of a HTR-MODULE design loaded with Deep-Burn fuel and Modified Open Cycle Components. ???Core analysis of a HTR-MODULE design loaded with Deep-Burn fuel and Americium targets.