LIDAR Wind Speed Measurement Analysis and Feed-Forward Blade Pitch Control for Load Mitigation in Wind Turbines: January 2010--January 2011

Dunne, F. ; Simley, E. ; Pao, L.Y.

关键词: ACCURACY;    BENDING;    CONTROL SYSTEMS;    DETECTION;    FEEDBACK;    FIRS;    LIFETIME;    MITIGATION;    OPTICAL RADAR;    REGULATIONS;    ROTORS;    SERIES EXPANSION;    SIMULATION;    TURBINES;    TURBULENCE;    VELOCITY;    WIND TURBINES WIND TURBINE CONTROL SYSTEMS;    WIND RESOURCE MEASUREMENT;    WIND ENERGY;    Wind Energy;   

DOI  :  10.2172/1028529
RP-ID  :  NREL/SR-5000-52098
PID  :  OSTI ID: 1028529
Others  :  Other: XEE-9-99404-01
Others  :  TRN: US201124%%382

学科分类：再生能源与代替技术

美国|英语

来源: SciTech Connect

【 摘 要 】

This report examines the accuracy of measurements that rely on Doppler LIDAR systems to determine their applicability to wind turbine feed-forward control systems and discusses feed-forward control system designs that use preview wind measurements. Light Detection and Ranging (LIDAR) systems are able to measure the speed of incoming wind before it interacts with a wind turbine rotor. These preview wind measurements can be used in feed-forward control systems designed to reduce turbine loads. However, the degree to which such preview-based control techniques can reduce loads by reacting to turbulence depends on how accurately the incoming wind field can be measured. The first half of this report examines the accuracy of different measurement scenarios that rely on coherent continuous-wave or pulsed Doppler LIDAR systems to determine their applicability to feed-forward control. In particular, the impacts of measurement range and angular offset from the wind direction are studied for various wind conditions. A realistic case involving a scanning LIDAR unit mounted in the spinner of a wind turbine is studied in depth with emphasis on choices for scan radius and preview distance. The effects of turbulence parameters on measurement accuracy are studied as well. Continuous-wave and pulsed LIDAR models based on typical commercially available units were used in the studies present in this report. The second half of this report discusses feed-forward control system designs that use preview wind measurements. Combined feedback/feed-forward blade pitch control is compared to industry standard feedback control when simulated in realistic turbulent above-rated winds. The feed-forward controllers are designed to reduce fatigue loads, increasing turbine lifetime and therefore reducing the cost of energy. Three feed-forward designs are studied: non-causal series expansion, Preview Control, and optimized FIR filter. The input to the feed-forward controller is a measurement of incoming wind speeds that could be provided by LIDAR. Non-causal series expansion and Preview Control methods reduce blade root loads but increase tower bending in simulation results. The optimized FIR filter reduces loads overall, keeps pitch rates low, and maintains rotor speed regulation and power capture, while using imperfect wind measurements provided by the spinning continuous-wave LIDAR model.