CHARACTERIZATION OF DWPF MELTER OFF-GAS QUENCHER SAMPLE

Newell, J.

关键词: AR FACILITIES;    ACTINIDES;    AIR FILTERS;    BORATES;    CHEMICAL ANALYSIS;    CHLORIDES;    CONDENSATES;    FISSION PRODUCTS;    FLUORIDES;    GASES;    GLASS;    HEAT EXCHANGERS;    IRON OXIDES;    OFF-GAS SYSTEMS;    PARTICULATES;    RADIOACTIVE WASTES;    SCANNING ELECTRON MICROSCOPY;    SCRUBBERS;    SLUDGES;    SPINELS;    STEAM;    SULFATES;    TANKS;    WASTE PROCESSING;    X-RAY DIFFRACTION;   

DOI  :  10.2172/1030795
RP-ID  :  SRNL-STI-2011-00520
PID  :  OSTI ID: 1030795
Others  :  TRN: US1200068

学科分类：核能源与工程

美国|英语

来源: SciTech Connect

【 摘 要 】

The Savannah River National Laboratory (SRNL) recently received a deposit sample from the Melter Primary Off Gas System (POG) of the Defense Waste Processing Facility (DWPF). This sample was composed of material that had been collected while the quencher was in operation January 27, 2011 through March 31, 2011. DWPF requested, through a technical assistance request, characterization of the melter off-gas deposits by x-ray diffraction (XRD), scanning electron microscopy (SEM), and chemical analysis. The purpose of the Melter Off-Gas System is to reduce the amount of radioactive particles and mercury in the gases vented to the atmosphere. Gases emitted from the melter pass through the primary film cooler, quencher, Off-Gas Condensate Tank (OGCT), Steam Atomized Scrubbers (SAS), a condenser, a high efficiency mist eliminator, and a high efficiency particulate air filter, before being vented to the Process Vessel Vent System. The film coolers cool the gases leaving the melter vapor space from {approx}750 C to {approx}375 C, by introducing air and steam to the flow. In the next step, the quencher cools the gas to about 60 C by bringing the condensate from the OGCT in contact with the effluent (Figure 1). Most of the steam in the effluent is then condensed and the melter vapor space pressure is reduced. The purpose of the OGCT is to collect and store the condensate formed during the melter operation. Condensate from the OGCT is circulated to the SAS and atomized with steam. This atomized condensate is mixed with the off-gas to wet and join the particulate which is then removed in the cyclone. The next stage incorporates a chilled water condenser which separates the vapors and elemental mercury from the off-gas steam. Primary off-gas deposit samples from the DWPF melter have previously been analyzed. In 2003, samples from just past the film cooler, from the inlet of the quencher and inside the quencher were analyzed at SRNL. It was determined that the samples were a mixture of sludge and glass frit. The major component was Si along with Fe, Al, and other elements in the radioactive waste being processed. The deposits analyzed also contained U-235 fission products and actinide elements. Prior to that, deposits in the off-gas system in the DWPF nonradioactive half scale melter and the one-tenth scale integrated DWPF melter system were analyzed and determined to be mixtures of alkali rich chlorides, sulfates, borates, and fluorides entrained with iron oxides, spinels and frit particles formed by vapor-phase transport and condensation. Additional work was performed in 2007 in which researchers similarly found the deposits to be a combination of sludge and frit particles.