EC Transmission Line Materials

Bigelow, Tim S¹ 

[1] ORNL

关键词: CYCLOTRONS;    DESIGN;    ELECTRICAL PROPERTIES;    ELECTRONS;    HEATING;    MANUALS;    POWER TRANSMISSION LINES;    PROCUREMENT;    RECOMMENDATIONS;    SAFETY;    TESTING;    TRITIUM;    WELDING;   

DOI  :  10.2172/1047023
RP-ID  :  ORNL/TM-2012/132
PID  :  OSTI ID: 1047023
Others  :  Other: AT5512020
Others  :  ERATITM
Others  :  US ITER 1050200-TD0001-R0
Others  :  TRN: US1203964

美国|英语

来源: SciTech Connect

【 摘 要 】

The purpose of this document is to identify materials acceptable for use in the US ITER Project Office (USIPO)-supplied components for the ITER Electron cyclotron Heating and Current Drive (ECH&CD) transmission lines (TL), PBS-52. The source of material property information for design analysis shall be either the applicable structural code or the ITER Material Properties Handbook. In the case of conflict, the ITER Material Properties Handbook shall take precedence. Materials selection, and use, shall follow the guidelines established in the Materials Assessment Report (MAR). Materials exposed to vacuum shall conform to the ITER Vacuum Handbook. [Ref. 2] Commercial materials shall conform to the applicable standard (e.g., ASTM, JIS, DIN) for the definition of their grade, physical, chemical and electrical properties and related testing. All materials for which a suitable certification from the supplier is not available shall be tested to determine the relevant properties, as part of the procurement. A complete traceability of all the materials including welding materials shall be provided. Halogenated materials (example: insulating materials) shall be forbidden in areas served by the detritiation systems. Exceptions must be approved by the Tritium System and Safety Section Responsible Officers.