Comparison of Two Independent LIDAR-Based Pitch Control Designs

Dunne, F. ; Schlipf, D. ; Pao, L. Y.

关键词: WIND TURBINE CONTROL;    LIDAR;    FEED-FORWARD CONTROLS;    FATIGUE LOAD MITIGATION;    ROTOR SPEED REGULATION;    POWER CAPTURE;    Wind Energy;   

DOI  :  10.2172/1050139
RP-ID  :  NREL/SR-5000-55544
PID  :  OSTI ID: 1050139
Others  :  Other: XEE-1-11300-01

学科分类：再生能源与代替技术

美国|英语

来源: SciTech Connect

【 摘 要 】

Two different lidar-based feedforward controllers have previously been designed for the NREL 5 MW wind turbine model under separate studies. Feedforward controller A uses a finite-impulse-response design, with 5 seconds of preview, and three rotating lidar measurements. Feedforward controller B uses a static-gain design, with the preview time defined by the pitch actuator dynamics, a simulation of a real nacelle-based scanning lidar system, and a lowpass filter defined by the lidar configuration. These controllers are now directly compared under the same lidar configuration, in terms of fatigue load reduction, rotor speed regulation, and power capture. The various differences in design choices are discussed and compared. We also compare frequency plots of individual pitch feedforward and collective pitch feedforward load reductions, and we see that individual pitch feedforward is effective mainly at the once-per-revolution and twice-per-revolution frequencies. We also explain how to determine the required preview time by breaking it down into separate parts, and we then compare it to the expected preview time available.