Technical Letter Report Development of Flaw Size Distribution Tables Including Effects of Flaw Depth Sizing Errors for Draft 10CFR 50.61a (Alternate PTS Rule) JCN-N6398, Task 4

Simonen, Fredric A. ; Gosselin, Stephen R. ; Doctor, Steven R.

关键词: PTS;    Pressurized Thermal Shock;    Fabrication Flaws Density and Distribution in RPVs;    PTS Rule;    Flaw Sizing Errors;   

DOI  :  10.2172/1077999
RP-ID  :  PNNL-17463 Rev. 1
PID  :  OSTI ID: 1077999
Others  :  Other: 401001060

美国|英语

来源: SciTech Connect

【 摘 要 】

This document describes a new method to determine whether the flaws in a particular reactor pressure vessel are consistent with the assumptions regarding the number and sizes of flaws used in the analyses that formed the technical justification basis for the new voluntary alternative Pressurized Thermal Shock (PTS) rule (Draft 10 CFR 50.61a). The new methodology addresses concerns regarding prior methodology because ASME Code Section XI examinations do not detect all fabrication flaws, they have higher detection performance for some flaw types, and there are flaw sizing errors always present (e.g., significant oversizing of small flaws and systematic under sizing of larger flaws). The new methodology allows direct comparison of ASME Code Section XI examination results with values in the PTS draft rule Tables 2 and 3 in order to determine if the number and sizes of flaws detected by an ASME Code Section XI examination are consistent with those assumed in the probabilistic fracture mechanics calculations performed in support of the development of 10 CFR 50.61a.