Building America Indoor Temperature and Humidity Measurement Protocol

Engebrecht-Metzger, C. ; Norton, P.

关键词: RESIDENTIAL;    RESIDENTIAL BUILDINGS;    NREL;    BUILDING AMERICA;    INDOOR TEMPERATURE;    INDOOR HUMIDITY;    DATA COLLECTION;    PROTOCOL;    INDOOR TEMPERATURE PROTOCOL;    HOUSE SIMULATION PROTOCOL;    TEMPERATURE STUDY;    BUILDING AMERICA;    RESIDENTIAL;    CLIMATE;    TEMPERATURE;    HUMIDITY;    Buildings;   

DOI  :  10.2172/1126283
RP-ID  :  NREL/TP-5500-61040
PID  :  OSTI ID: 1126283

学科分类：能源（综合）

美国|英语

来源: SciTech Connect

【 摘 要 】

When modeling homes using simulation tools, the heating and cooling set points can have a significant impact on home energy use. Every 4 years the Energy Information Administration (EIA) Residential Energy Consumption Survey (RECS) asks homeowners about their heating and cooling set points. Unfortunately, no temperature data is measured, and most of the time, the homeowner may be guessing at this number. Even one degree Fahrenheit difference in heating set point can make a 5% difference in heating energy use! So, the survey-based RECS data cannot be used as the definitive reference for the set point for the 'average occupant' in simulations. The purpose of this document is to develop a protocol for collecting consistent data for heating/cooling set points and relative humidity so that an average set point can be determined for asset energy models in residential buildings. This document covers the decision making process for researchers to determine how many sensors should be placed in each home, where to put those sensors, and what kind of asset data should be taken while they are in the home. The authors attempted to design the protocols to maximize the value of this study and minimize the resources required to achieve that value.