Fabrication Control Plan for ORNL RH-LOCA ATF Test Specimens to be Irradiated in the ATR

Kevin G. Field ; Richard Howard ; Michael Teague

关键词: Fabrication Plan;   

DOI  :  10.2172/1173094
RP-ID  :  INL/EXT-14-31986
PID  :  OSTI ID: 1173094

学科分类：核能源与工程

美国|英语

来源: SciTech Connect

【 摘 要 】

The purpose of this fabrication plan is (1) to summarize the design of a set of rodlets that will be fabricated and then irradiated in the Advanced Test Reactor (ATR) and (2) provide requirements for fabrication and acceptance criteria for inspections of the Light Water Reactor (LWR) ??? Accident Tolerant Fuels (ATF) rodlet components. The functional and operational (F&OR) requirements for the ATF program are identified in the ATF Test Plan. The scope of this document only covers fabrication and inspections of rodlet components detailed in drawings 604496 and 604497. It does not cover the assembly of these items to form a completed test irradiation assembly or the inspection of the final assembly, which will be included in a separate INL final test assembly specification/inspection document. The controls support the requirements that the test irradiations must be performed safely and that subsequent examinations must provide valid results.