Beneficial Use of Carbon Dioxide in Precast Concrete Production

Shao, Yixin¹ 

[1] McGill Univ., Montreal, QC (Canada)

关键词: Clean Coal Technology;    Coal - Environmental Processes;   

DOI  :  10.2172/1155035
RP-ID  :  None
PID  :  OSTI ID: 1155035

学科分类：材料科学（综合）

美国|英语

来源: SciTech Connect

【 摘 要 】

The feasibility of using carbon dioxide as feedstock in precast concrete production is studied. Carbon dioxide reacts with calcium compounds in concrete, producing solid calcium carbonates in binding matrix. Two typical precast products are examined for their capacity to store carbon dioxide during the production. They are concrete blocks and fiber-cement panels. The two products are currently mass produced and cured by steam. Carbon dioxide can be used to replace steam in curing process to accelerate early strength, improve the long-term durability and reduce energy and emission. For a reaction within a 24-hour process window, the theoretical maximum possible carbon uptake in concrete is found to be 29% based on cement mass in the product. To reach the maximum uptake, a special process is developed to promote the reaction efficiency to 60-80% in 4-hour carbon dioxide curing and improve the resistance to freeze-thaw cycling and sulfate ion attack. The process is also optimized to meet the project target of $10/tCO₂ in carbon utilization. By the use of self-concentrating absorption technology, high purity CO₂ can be produced at a price below $40/t. With low cost CO₂ capture and utilization technologies, it is feasible to establish a network for carbon capture and utilization at the vicinity of carbon sources. If all block produces and panel producers in United States could adopt carbon dioxide process in their production in place of steam, carbon utilization in these two markets alone could consume more than 2 Mt CO₂/year. This capture and utilization process can be extended to more precast products and will continue for years to come.