MELCOR/CONTAIN LMR Implementation Report. FY14 Progress

Humphries, Larry L ; Louie, David L.Y.

关键词: M CODES;    C CODES;    REACTOR ACCIDENTS;    SODIUM;    VALIDATION;    DESIGN;    PHYSICAL PROPERTIES;    IMPLEMENTATION;    FIRES;    LIQUIDS;    DOCUMENTATION;    SPRAYS;    VERIFICATION;   

DOI  :  10.2172/1164536
RP-ID  :  SAND--2014-19183
PID  :  OSTI ID: 1164536
Others  :  TRN: US1600074

美国|英语

来源: SciTech Connect

【 摘 要 】

This report describes the preliminary implementation of the sodium thermophysical properties and the design documentation for the sodium models of CONTAIN-LMR to be implemented into MELCOR 2.1. In the past year, the implementation included two separate sodium properties from two different sources. The first source is based on the previous work done by Idaho National Laboratory by modifying MELCOR to include liquid lithium equation of state as a working fluid to model the nuclear fusion safety research. To minimize the impact to MELCOR, the implementation of the fusion safety database (FSD) was done by utilizing the detection of the data input file as a way to invoking the FSD. The FSD methodology has been adapted currently for this work, but it may subject modification as the project continues. The second source uses properties generated for the SIMMER code. Preliminary testing and results from this implementation of sodium properties are given. In this year, the design document for the CONTAIN-LMR sodium models, such as the two condensable option, sodium spray fire, and sodium pool fire is being developed. This design document is intended to serve as a guide for the MELCOR implementation. In addition, CONTAIN-LMR code used was based on the earlier version of CONTAIN code. Many physical models that were developed since this early version of CONTAIN may not be captured by the code. Although CONTAIN 2, which represents the latest development of CONTAIN, contains some sodium specific models, which are not complete, the utilizing CONTAIN 2 with all sodium models implemented from CONTAIN-LMR as a comparison code for MELCOR should be done. This implementation should be completed in early next year, while sodium models from CONTAIN-LMR are being integrated into MELCOR. For testing, CONTAIN decks have been developed for verification and validation use.