DWPF Melter Off-Gas Flammability Assessment for Sludge Batch 9

Choi, A. S.¹ 

[1]Savannah River Site (SRS), Aiken, SC (United States)

关键词: VAPORS;    FLAMMABILITY;    MITIGATION;    SLURRIES;    WASTE PROCESSING;    COMBUSTION;    COMPUTERIZED SIMULATION;    GAS FLOW;    EVALUATION;    HAZARDS;    SLUDGES;    OFF-GAS SYSTEMS;    DILUTION;    INSTABIL;   

DOI  :  10.2172/1262322
RP-ID  :  SRNL-STI--2016-00318
PID  :  OSTI ID: 1262322
Others  :  TRN: US1601602

学科分类：核能源与工程

美国|英语

来源: SciTech Connect

【 摘 要 】

The slurry feed to the Defense Waste Processing Facility (DWPF) melter contains several organic carbon species that decompose in the cold cap and produce flammable gases that could accumulate in the off-gas system and create potential flammability hazard. To mitigate such a hazard, DWPF has implemented a strategy to impose the Technical Safety Requirement (TSR) limits on all key operating variables affecting off-gas flammability and operate the melter within those limits using both hardwired/software interlocks and administrative controls. The operating variables that are currently being controlled include; (1) total organic carbon (TOC), (2) air purges for combustion and dilution, (3) melter vapor space temperature, and (4) feed rate. The safety basis limits for these operating variables are determined using two computer models, 4-stage cold cap and Melter Off-Gas (MOG) dynamics models, under the baseline upset scenario - a surge in off-gas flow due to the inherent cold cap instabilities in the slurry-fed melter.